Can You Use Ethanol Coolant for Ureilite Cutting?
2026-06-06
Yes — ethanol coolant for ureilite cutting works, but it’s not as simple as swapping water for ethanol. The switch changes two things at once: you take on ethanol’s flammability,
Posts
Read More »
What Is CNC Glass Cutting Wire Saw? Types, Uses, Guide
2026-06-05
Ever wonder how a factory can cut hard glass into beautiful designs with such little waste? Something a lot of sectors might use on a daily basis. I have 12
Wire Saw Cutting for Tungsten and Molybdenum
2026-05-26
Pure tungsten cracks at room temperature. Not sometimes — almost always, if your cutting method generates any lateral force. We had a customer ship us a 25 mm diameter tungsten
Can CNC Wire Saw Reduce Material Stress? controlled slicing, low vibration, safety
2026-05-26
The slabs of stone or crystal break at once when they are cut. Why? I’ve seen a lot of similar cases like this. I’ve been in precision cutting for 8
Diamond Wire Cutting for Titanium Alloys
2026-05-25
Titanium fights back when you cut it. We learned this the hard way — a customer sent us Ti-6Al-4V turbine blade blanks for sample sectioning. The first cut looked perfect.
Can Industrial Wire Saws Handle Dense Materials? granite cutting, silicon slicing, composites
2026-05-25
One tool cuts granite, silicon and composites? In my 6 years in the stone and materials business, industrial wire saws have gone from quarry tools to precision machines. This page
Ferrite Magnet Cutting for SmCo and Ferrite Magnets
2026-05-23
SmCo magnets crack without warning. We’ve had a customer send us a batch of Sm2Co17 arc segments — 40 pieces total — and ask why their blade saw was destroying
NdFeB Magnet Cutting with Diamond Wire Saws
2026-05-21
NdFeB magnets are strong, compact, and easy to damage during cutting. The problem is not only hardness. In NdFeB magnet cutting, the real trouble usually comes from brittle grain fracture,
Hard Metal Cutting with Diamond Wire Saw — Titanium, Tungsten, and Molybdenum
2026-05-21
Hard metal cutting is where most conventional tools fail fast. Titanium alloys, tungsten, and molybdenum share a reputation that anyone who’s machined them knows well: they destroy tooling. Ti-6Al-4V eats
Magnet Cutting Machine: How to Choose the Right One
2026-05-19
Buying a magnet cutting machine is a decision most shops only make once every 5–10 years. Get it right, and the machine pays for itself in reduced scrap, better surface