Wire Saw for Metal — Cold Precision Cutting
Wire Saw for Metal
Cold. Clean. Precise.
Abrasive diamond wire cutting with no thermal distortion or burr formation — purpose-built for stainless steel, titanium, copper, and exotic alloys.
Cutting Principle
Diamond Wire Saw vs. Conventional Metal Cutting Methods
No heat-affected zone, no recast layer — critical for precision metal sample prep and optics substrate machining.
Compatibilidad de materiales
Metal Types Suitable for Diamond Wire Cutting
From ductile aerospace alloys to brittle precious metals — diamond wire delivers consistent, burr-free cuts across the full metallic spectrum.
Cutting Characteristics
Why Cold Wire Cutting Changes Everything for Metal
Zero Thermal Damage
No heat-affected zone. Critical for titanium, Inconel, and heat-sensitive alloys.
Burr-Free Surface
Chip-free, burr-free edges — eliminating deburring steps for aerospace and medical components.
Precision Sample Prep
Ideal for metallographic sections and SEM/TEM prep. Preserves microstructure integrity.
Coolant-Assisted
Water-based or light oil prevents oxidation — critical for titanium, aluminum, and copper.
Super fast cutting speed
Compare to EDM wire cutting, endless diamond wire saw can cut 10 times faster
Process Parameters
Optimized Settings for Metal Wire Saw Cutting
| Velocidad del cable | 40 – 70 m/s |
| Tensión del cable | 180 – 230 N |
| Coolant Type | Water-based or Light Oil |
| Diámetro del alambre | 0.35 – 0.5 mm |
| Velocidad de alimentación | 0.2 – 1.5 mm/min |
| Surface Roughness Ra | 2 – 5 μm |
| Calidad de la superficie de corte | Flat, oxide-free layer |
Surface Quality Benchmark
Recommended Machines
Vimfun Models Recommended for Metal Cutting
Automatic-tension control + oil-based coolant compatible for oxidation prevention.
Best Seller
Compact precision wire saw for metal sample prep in research labs.
- ►Max: 200 x 200 x 150 mm
- ►Wire dia: 0.35 – 0.5 mm
- ►3-axis CNC
- ►Best for: Ti, NdfeB,SS
High Capacity
Mid-scale industrial wire saw for production big size metal cutting.
- ►Max: Dia 600 mm
- ►Tension: 180 – 300 N
- ►3-axis programmable feed
- ►Best for: big size expensive metal
Slicing Specialist
Multi function for high-volume metal wafer and contour cutting.
- ►Auto slice indexing
- ►Thickness ±0.03 mm
- ►Complex contour cut
- ►Best for: NdFeB, Cu, Ti bars
PREGUNTAS FRECUENTES
Common Questions About Wire Saw for Metal
Yes. Diamond wire saw machines cut stainless steel grades including 304, 316L, and 440C with excellent surface finish. The cold abrasive mechanism avoids work hardening. Typical feed rate for 304 SS (20mm rod) is 0.3–0.8 mm/min with water-based coolant.
Water-based coolant with rust inhibitor additives (pH 8–9) is recommended for stainless steel. For titanium and reactive metals, light mineral oil is better. Vimfun machines include a closed-loop coolant recirculation system compatible with both types.
Diamond wire saw achieves Ra 2–5 μm — not better than EDM (Ra 0.4–1.6 μm). But Unlike EDM, endless diamond wire saw can cut super fast.
Yes. Tungsten (HV ~3400) and molybdenum (HV ~1500) can be sectioned without thermal cracking. Feed rates are slow (0.1–0.3 mm/min) but the result is crack-free, burr-free surfaces suitable for further analysis.Further more, we have a clients who cut Powder metallurgy containing tungsten
Ready to Cut Metal with Precision?
Check videos of metal cut or request a free sample test for your specific material.